Antwort schreiben 
  • 0 Bewertungen - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Autodesk Netfabb Premium 2019 R2 (x64)
13.02.2019, 17:24
Beitrag: #1
Autodesk Netfabb Premium 2019 R2 (x64)
Autodesk Netfabb Premium 2019 R2 (x64)

[Bild: 3c503dd73409a07fc5bda4cace38f408.jpg]

Autodesk Netfabb Premium 2019 R2 (x64)
x64 | Language:English | File Size: 1.38 GB

Netfabb is a powerful software for producing, cutting, troubleshooting, and preparing 3D models for sending 3D printers. Like other AutoCAD products, the program has a simple interface and provides plenty of features. Three-dimensional printing is an almost new industrial one, which has recently entered a more serious trade campaign. Due to the importance of this issue, the world of software has also been instrumental in facilitating and enriching the industry and has provided many tools and software so far. Teutc as one of the key players in the field of CAD in this field of software Netfabb, which is considered one of the best among the fanciers.

Models that are created by three dimensional software such as TriDex are not necessarily suitable for 3D printing, and therefore, by incorporating 3D models of other 3D software in the Netfabb software, the final steps to optimize it It is being implemented as an acceptable model for 3D printing. This program uses a variety of methods for 3D printing, which is best suited for project conditions. The speed and precision of the program is excellent thanks to its modern team programming, and it does not have any leaps and bounds if you provide the optimal hardware for this program. At any stage of the process, you can apply the desired changes to the project and see the result quickly.


System Requirements:
-Microsoft� Windows� 10 64-bit
-Microsoft Windows 8.1 64-bit
-Microsoft Windows 7 SP1 64-bit
Note:32-bit Windows, or older Windows platforms, as well as Linux or any OS by Apple is not supported.
CPU:Intel� Core i5 (2.8+ Ghz)
Memory:8 GB of RAM
Display:Display Card with OpenGL 3.3 support
Display Resolution:1280 x 1024 minimum

Whats New
New Menu Style:
-Access violation when hitting F2 to rename a part while the new menu style is active
-Shield Labeling and List Labeling swapped with respect to their buttons in the new menu
-Keyboard shortcuts assigned to the labeling modes are ignored while the new menu style is active
-Netfabb does not react to SpaceMouse� input anymore
-Clipping planes do not work properly while the new menu style is active and the clipping planes view -is detached from main window
-Access violation in rare circumstances after visiting Settings
-Minor icon, naming, and arrangement inconsistencies in menu structure

Machine workspaces:
-SLM 280 HL 1.0 has configurations missing
-Unable to save custom configuration for Xact Metal machines
-No configurations available for Xact Metal machines in Netfabb Premium
-Performing Z-compensation in Sisma workspaces removes support
-Rare glitches in W2P workspaces
-ExOne workspaces show various small issues
-Z value of build platform ignores buildplate thickness value

Lattice Commander:
-An issue causes Invalid type cast message
-The Trim role trims both mesh and lattice bodies instead of lattices only as intended

-Netfabb can launch on screen space of disconnected monitor
-Cannot resize cutting plane by right-clicking and dragging the plane's nodes

Loading simulation results:
-Netfabb cannot read simulation results when write results frequency in Simulation Utility is set to greater than 1
-Simulation results in the support module are not updated when the unit system is switched

-Inconsistent EBPA export results
-Fixed an issue with inconsistent export results in Netfabb when an EBPA is used which uses the ATU material-thickness calculation.

Invalid Iterators:
-Fixed invalid iterators in javascript when the corresponding list is cleared

Disappearing breakpoints
-Fixed unexpectedly disappearing breakpoints in editor

Invalid memory read access:
-Fixed memory access error

Wrong Encoding on file open:
-Fixed wrong character encoding when opening a file by clicking on a breakpoint in the breakpoint list
Wrong Encoding on file save
-Fixed wrong encoding when saving a file which is opened in an editor but not added to the current project

Breakpoint cannot be removedL
-Fixed an issue with breakpoints which cannot be removed at line 0



Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
Antwort schreiben 

Möglicherweise verwandte Themen...
Thema: Verfasser Antworten: Ansichten: Letzter Beitrag
  Autodesk.CFD.2019.2.Ultimate.x64.Multilanguage apple2000 0 16 14.08.2019 17:26
Letzter Beitrag: apple2000
  Autodesk CFD 2019.2 Ultimate (x64) Multilanguage apple2000 0 13 12.08.2019 17:12
Letzter Beitrag: apple2000
  Autodesk CFD 2019.2 apple2000 0 13 12.08.2019 16:13
Letzter Beitrag: apple2000
  PVSOL PREMIUM 2019 R6 high86 0 13 10.08.2019 21:20
Letzter Beitrag: high86
  Premium HMI 2019 version 5.0 apple2000 0 11 10.08.2019 16:50
Letzter Beitrag: apple2000
  Autodesk.Maya.2019.2.x64.macOS.Multilanguage apple2000 0 14 06.08.2019 18:53
Letzter Beitrag: apple2000
  Autodesk.Maya.LT.2019.2.macOS.Multilanguage apple2000 0 15 06.08.2019 18:42
Letzter Beitrag: apple2000
  Autodesk Powermill Ultimate 2019.2.2 (x64) Multilanguage apple2000 0 16 06.08.2019 01:48
Letzter Beitrag: apple2000
  Autodesk Maya 2019.2 (x64) apple2000 0 20 02.08.2019 16:51
Letzter Beitrag: apple2000
  Autodesk Maya LT 2019.2 (x64) apple2000 0 19 02.08.2019 16:48
Letzter Beitrag: apple2000